THE SMALL AND MIGHTY FIELD RECORDER
SMALL DESIGN, BIG SOUND
With 32-bit float recording, the F3 effortlessly captures the quietest raindrops and the loudest explosions. Its small footprint allows for this recorder to be placed anywhere, as you capture and monitor up to 192 kHz of high-quality audio.
- 2-channel / 2-track field audio recorder
- Featuring 32-bit float recording and dual AD converters for full dynamic range and clip-free audio capture
- 2 discrete inputs with locking XLR connectors
- Input signals can be monitored with realtime waveform display on LCD
- Compact and Durable (can be attached to boom mic with velcro)
- High quality mic preamps provide a super-low noise floor (−127 dBu EIN)
- Record up to 192 kHz sampling/32-bit float WAV format, mono or stereo files
- Stereo ⅛" Phone/Line Output jack with dedicated Volume control
- Records directly to microSDHC and microSDXC cards up to 1 TB
- Wireless iOS/Android* remote control available through optional BTA-1 Bluetooth adapter (*Android version to be released in 2022)
- Use as 2-in/2-out USB audio interface (up to 32-bit float/96 kHz)
- Over 8 hours of operation with two AA alkaline batteries
- Runs on only 2 standard AA batteries or AC adapter (AD-17) or USB battery pack
- Wireless timecode synchronization (*Optional BTA-1 Bluetooth adapter and UltraSync Blue device by Timecode Systems are required.)
WHAT’S IN THE BOX
Package includes
- F3 Field Recorder
- Quick Tour
Optional Accessories
- BTA-1 Bluetooth Adapter
- TPS-5 Tripod Stand
- AD-17 DC 5V AC Adapter
- SCU-20 Soft Shell case
SPECS
Input and output channels
INPUTS | MIC/LINE (mono): | 2 |
OUTPUTS | LINE OUT: | 1 |
PHONE OUT: | 1 |
Inputs
MIC/LINE (MONO) | Connectors: | 2 XLR (2: HOT) |
Input gain: | Adjustment unnecessary (dual AD converter circuits used) | |
Input impedance: | MIC: 3 kΩ or more | |
LINE: 3 kΩ or more | ||
Maximum input level: | MIC: +4 dBu | |
LINE: +24 dBu | ||
Phantom power: | +24/48 V | |
Combined channel total of 10 mA or less | ||
Equivalent input noise: | −127 dBu or less (IHF-A) when waveform magnification is ×1024 with 150 Ω input |
Outputs
LINE OUT | Connector: | 1 stereo mini jack |
Maximum output level: | +1 dBu | |
Output impedance: | 100 Ω or less | |
PHONE OUT | Connector: | 1 stereo mini jack |
Maximum output level: | 50 mW + 50 mW (into 32 Ω load) | |
Output impedance: | 15 Ω or less |
Recorder
Maximum simultaneous recording tracks: | 2 | |
Maximum simultaneous playback tracks: | 2 | |
Recording format: | WAV | |
44.1/48/ 88.2/96/192 kHz, | ||
32-bit float mono/stereo | ||
BWF and iXML formats supported | ||
Recording media: | 4 – 32 GB cards compatible with the microSDHC specification | |
64 GB – 1 TB cards compatible with the microSDXC specification |
Display
LCD with backlight (96×64 resolution) |
USB
Connector: | USB Type-C | |
• Use a USB cable that supports data transfer. USB bus power is supported. | ||
Audio interface operation: | USB2.0 High Speed | |
44.1/48/88.2/96 kHz,24-bit linear/32-bit float | ||
• 32-bit float format is supported for firmware version 2.0 or later. | ||
2-in/2-out | ||
Mass storage operation: | USB 2.0 High Speed |
REMOTE
Dedicated wireless adapter (ZOOM BTA-1) |
POWER
2 AA batteries (alkaline, NiMH or lithium) | ||
AC adapter (ZOOM AD-17): DC 5 V/1 A | ||
• USB bus power is supported. |
ESTIMATED CONTINUOUS OPERATION TIME USING BATTERIES | 48 kHz/32-bit float, 2ch recording to microSDHC card | Alkaline batteries: about 8 hours NiMH batteries (1900 mAh): about 8.5 hours Lithium batteries: about 18 hours |
• THE VALUES ARE APPROXIMATE. | (without headphones, PHANTOM off, LCD Backlight off) | Alkaline batteries: about 2 hours |
• CONTINUOUS BATTERY OPERATION TIMES WERE DETERMINED USING IN-HOUSE TESTING METHODS. | 48 kHz/32-bit float, 2ch recording to microSDHC card | NiMH batteries (1900 mAh): about 3 hours |
THEY WILL VARY GREATLY ACCORDING TO USE CONDITIONS. | (headphones into 32Ω load, PHANTOM at 48 V (5 mA), LCD Backlight off) | Lithium batteries: about 7.5 hours |